uniconfig.h custom buttons
I would like to add some custom buttons.1. Button that starts autolevel2. Button that turns the CASE_LIGHTS_PIN on3. Button that executes a particular gcode file (not just recently seleced)with #3 I...
View ArticleTunell 3D Printer Filament Monitor
HelloIs there support Tunell 3D Printer Filament Monitor system? http://www.toybuilderlabs.com/products/tunell-3d-printer-filament-monitor?variant=963597844I try to activate jam detection, but it not...
View ArticleIs it possible to set "#define UI_RESET_PIN -1"?
Hey!Easy question: Is it possible to disable the UI_RESET_PIN by setting it to "#define UI_RESET_PIN -1"? Or will I encounter any problems with that?Background: I am looking into possibilities to add a...
View ArticlePrevent automatic screen changes
Recently I upgraded the repetier fw and since then the home screen and the screen showing overall stats (print time and filament printed) ist automatically cycled every few seconds. I find this super...
View ArticleProblems uploading 92.9 to MKSBase 1.3
So was in the progress of making a version of this for me and some other people with the same type of printer (TEVO Tarantula) that uses an MKSBase board. Version 92.8 uploaded fine, but version 92.9...
View ArticleError:One heater seems decoupled from thermistor - disabling all for safety!
How do I disable protection?For since this off the bed and estrusor in print. I've lost several hours of printing.Error:One heater seems decoupled from thermistor - disabling all for safety!
View ArticleRetraction - Where is USE_OPS
I am using repeteier 0.92.x . I cannot find fast retraction or USE_OPS. Has this been removed?1. How do I do fast retraction in Repetier Host?2. What values should I "calibrate"? REtraction speed?...
View ArticleProblem: 0.9.29 dual extruder, second extruder stuck and hangs firmware
Hi,I added a second extruder to my working configuration RAMPS 1.4 with RDD fan extender.Fans work, heater on both extruders as well.First extruder correctly extracts/retracs.Second extruder get's...
View Articlev092.9 Printing Issue
I have a kossel 3d printer. I have uptaded the firmware to v092.9 but I have problems with it. Even if I spent too much time to re - calibrate the printer, the printer started to print in unintended...
View ArticleImplementing LASER INTENSITY
Hi all ! I'm trying to implement laser intensity routine, i have a laser driver with a TTL input so, i try to modify source from : WRITE(LASER_PIN,(LASER_ON_HIGH ? newIntensity > 199 : newIntensity...
View ArticleFull Graphic Smart controller
HII have a problem.First i had a problem thtat when i insert the sd card it says thrat the card is removed. then i have changed something in the firmware and have had a 14 hour print witch stoped on 92...
View ArticleClarifications 3D and CNC
Hi at all I have some questions.I need clarification regarding use of 0.92.9 firmware as a 3D printer and CNC.Can i use the firmware set as 3D printer and CNC together?How it work?In the configurator,...
View ArticleVersion 92 Upload Error
So i wanted to update to the newest version. I cant get it to my Printer. Melzi 2.0 BoardThis is the Link to a Document where the errors are saved in. (22 Pages, too many to Post here)Maybe someone...
View ArticleRepetier 0.92 Y Endstop Problem
Hello,Description of my Problem:After Uploading the new 0.92 to 5 Button LCD with Melzi 2.0 China Printer my axe directions were a bit messed up. I fixed it with inverting.When homing my y-Axis the...
View ArticleThermistor tables
I am having trouble finding a good basic description on how to make my own thermistor table for the thermistor I have. Its an NTC 3950 thermistor. I know that repetier firmware has a table for it, but...
View ArticleIssue with Y-axis speed and extruder 0.92.9 DELTA RADDS 1.5 RAPS128 DUE
Hi all,I recently upgraded my Delta printer to RADDS 1.5, RAPS128 and Arduino DUE to improve movement and print quality.My issue is, that the Y-axis is much faster than X- and Z-axis. Also the extruder...
View ArticleZ Probe Auto bed leveling Issue
Hi,i installed a z level sensor. When i try to upload my configuration which i changed like the how to from this homepage i get some errors.This is the are i changed:#define Z_PROBE_Z_OFFSET 0#define...
View ArticleExtruder stops Extruding + Heatbed stops Heating in the middle of printing
Hi, im pretty new to Reprap and Repetier. I've just finished building my first P3Steel and managed to get Repetier Firmware (0.92) and Host running. I did not find any discussion about my problem so i...
View ArticleZ axis slow
When selecting 10 mm z axis move I am lucky to get 1mm. How can I increase the rotation of the z axis motors to enable the appropriate movement.
View ArticleTWO Max 6675 thermocouple on ramps
Hi repetierrecently i bought a two extruder AHIRO from china with thermocouple max 6675how can i wire both of them in ramps and how can i setup the firmware ?i can wire just one of them cause ramps has...
View Article